* CONSTRUCTION OF SOLAR POWER PLANT 50MW HYBRID PLANT IN MANGYSTAU REGION. * Monitoring compliance of volumes and quality of work with project documentation, specifications, and regulatory requirements. * Overseeing the documentation procedures and execution documents: project quality assurance plan and departmental control plans; non-conformance and corrective action procedures (NCR/SR); project quality management plan; inspection and testing plans (ITP); maintaining and coordinating the register of inspection requests (RFI/NFI). * Quality control of general construction, welding, metal structures, electrical installation, telecommunications work, and instrumentation and automation (I&C) tasks. Incoming quality control of materials and equipment. * Control and documentation of execution documents: test protocols; FAT (Factory Acceptance Test); manufacturers' passports/certificates for equipment; upon completion of commissioning, SAT (Site Acceptance Test); QVD; Acts; Checklists; Dockets. * Control and submission of documents for mechanical completion (MC) and pre-commissioning activities (PC) for the project/system/subsystem in accordance with the project; participation in necessary tests. * Maintaining a register and punch list with categorization (A, B, C) and monitoring their resolution. * Installation, calibration, and inspection of I&C devices, panels, and junction boxes. * Installation and inspection of HVAC (heating, ventilation, and air conditioning) systems. * Installation and inspection of cathodic protection systems. Installation and inspection of fire and gas detection systems (F&G). * Installation and inspection of communication and notification systems (Telecom, PA/GA) and video surveillance (CCTV). Inspection of pressure testing of impulse and pneumatic lines, manifolds. * Testing of insulation resistance and checking electrical continuity of power, Low-HV voltage, I&C, fiber optic, and control cables. * Installation and inspection of lighting systems and low-power lines. * Installation and inspection of grounding and lightning protection systems. * Installation and inspection of power transformers up to 10 kV and 110/35 kV, power and I&C panels, junction boxes, and electric motors. * Installation and inspection of 110 kV overhead lines (OHL). * Monitoring compliance with construction schedules and regulatory requirements. * Verifying the availability and correctness of documents confirming the quality of structures, products, and materials (passports, certificates, laboratory test results, etc.). * Acceptance and handover work; working with technical documentation; interaction with representatives of the Customer, General Contractor, and supervisory authorities in technical English.

* Participation in strategic planning, support for construction and commissioning of facilities to monitor key issues, objectives and project performance. * Verify compliance with all KPO project procedures in accordance with established requirements. * Participate in safety-related audits and inspections, including the Zero Incidents and Safe Work programmers. * Overseeing the modernization and expansion of existing KPO projects on site. * Ensuring that all planned work is carried out, including work orders, methodological statements and declarations as part of work order procedures and risk assessments. * Supporting and implementing safety initiatives at all stages of the project. * Overseeing compliance with construction plans, standards and schedules. * Checking and confirming technical documentation (TQ and SQ), agreeing on drawings for construction stages and pre-commissioning work. * Ensuring that quality plans comply with KPO specifications and standards within the ITP (Inspection Test Plan). * Informing management and the project engineer of indicators and changes that may affect costs or contractual obligations. * Verifying that partners comply with construction schedules and other related requirements. * Monitoring the condition of work tools and equipment, ensuring their effective use. * Participating in the review, commenting on and approval of project documentation, drawings and work packages. * Ensuring that the work performed complies with the approved project packages and drawings. * Respectful interaction with the workforce, compliance with ethical standards and rules, support for the trust and respect programmer. * Coordination of work processes and materials. * Monitoring the implementation of construction plans, schedules and the quality of work. * Participation in meetings with various KPO departments and business partners. Technical skills and projects: * Installation of electrical and control and measuring instruments. * Installation of power transformers (10 kV) and overhead power lines. * Installation of electric motors, electrical and telecommunications panels, and instrumentation and control equipment. * Organization of grounding and lightning protection systems. * Installation of telecommunications systems. * Installation of heating systems. * Installation of cathodic protection systems for pipelines.

- Act in a strategic role and support construction and commissioning to be aware of all key issues, project objectives and performance. - Verify and Conform to the below requirements of the NCOC project procedures. - Participation in life saving checklists and audits like Zero Incident and Safe Work as required by the project and implementations. - My task is only All internal and external on the sites of existing modernizations and expansion of NCOC projects. - Verification and Confirmation how a Job Holder of all planned Work Orders that PTW, Metod Statements are carried out in accordance with the Work Order procedure and with the Risk Assessment as the Task Manager of all sections. - Support security initiatives - Contractor's oversight role to ensure compliance with Methodological Statements and Construction Plans. - Checking all technical issues (TQ and TE) as documented and signing all drawings with approval for construction and for Pre-commissioning. - Compliance with and maintenance of a quality plan in accordance with ITP and NCOC Specifications + Standarts. - Assess and confirm that non-food items are reviewed and open comments/non-finishes are closed. - Inform the Project Engineer and Senior Management of any performance and potential changes that may result in contract changes/costs for the Company. - Participate and inform about civil and structural status in the weekly progress update. - Assess and confirm that the Contractor is following the construction path as specified in the forecast schedule. - Checking that all operating equipment is in working order and is being used effectively. - Verify electrical/tool ​​crews are on site and ensure planned ratios are being maintained. - Participate for review and comments or approved of all new and current design work packages and documents and technical drawings. Work plan planning: - Confirm that the Contractor is working in accordance with the Work Package and drawings. - Providing IWP status updates - Maintain daily walk with the Contractor. - Engage workforce and respect while respecting all the etiquette that the trust and respect program is upholding. - Support during constructability/readiness checks to be carried out with the Contractor. - Confirmation that the Contractor is using method statements - Coordination of all labor and materials - Construction plan control; including schedule; quality report. - Accelerate and maintain the completion of all construction works in accordance with the distribution of work. - Our achievement - we have completed several projects in parallel, such as the modernization and expansion of the Reiboler on Tranche-2, the Telecom room in the buildings of the CCB and on the PGP, on the Flare line, participation in the full specified time on the overhaul of TAR-2022 + on the island "D" installation of the Spynel Camera in a very short time. - We participate constantly at all meetings both online and with meetings with different departments of NCOC and as our business partners. - All trainings updated to 2025/2026

Act in Strategic role and supports the Construction and be aware of key issues, project objectives and performance. - Compliant with the below Project requirements / Procedures - Participate in the save a life, IIF, ELC, MVS and Safe Work check lists are as per Project requirement and are implemented - Confirm PTW, PPHA are done in accordance with the PTW Procedure - Support Safety initiatives - Surveillance role on Contractor ensuring compliance with Method Statements & Construction Plans - Compliance with the below Project requirements - Compliance with Quality Plan according ITP’s - Evaluate and confirm NFI’s are inspected and open comments / punch items are closed - Quality control of all E&I pre-commissioning works - Inform CM / DCM of any execution and potential changes that may result in contract variations / costs to Company - Participate and provide Civil and Structural status in the weekly progress update - Evaluate and confirm that Contractor is following the path of construction as outlined in the forecast schedule - Confirm all operated equipment are operational and is utilized effectively - Confirm electrical / instrument crews are on site and ensure the planned ratios are maintained - Inform the CM / DCM if the interface agreements are not been followed by the Construction teams Work Face Planning: - Confirm if the Contractor is working to the IWP’s - Provide IWP status updates to the CM / DCM - Support the CM / DCM with the daily site walk with the Contractor - Confirm Contractor is working as per plan - Engage the work force – ensure trust and respect program is maintained - Support the CM / DCM during the constructability / readiness reviews that are held with the Contractor - Confirm that the Contractor is utilizing method statements - Coordinating all manpower and materials - Monitoring the construction plan; including schedule; quality report. - Responsible to ensure the electrical / instrument works are achieved in accordance with the plan and schedule - Expedite completion of all construction activities in accordance with Scope Allocation

- Controlling contractor procedures, inspection and test plans and other technical and quality documents, to ensure effective controls... - Incoming Inspection of the material dept to ensure that materials have all needed documentation before start of work - Performing inspection for all E&I equipment’s installations, hookup, loop checking and functional testing are in compliance with the technical requirement according to the project specification. - Inspection of cable installation including cable trays, cable glands, termination, insulation resistance, continuity testing etc. - Witnessing all tests including verification and calibration of instruments and safety devices - Inspection of Fiber optic cable installation - Inspection on 110kV Substation and 35/10 KV Substations - Inspection and tests of High voltage system from 110KV to 35KV and from 35KV to 10KV after installing high voltage cables , Diesel generator, Power Transformer, Switchboard, Instrument Panel & HVAC Panel, Lighting and Earthing system - Performing inspection for all E&I equipment’s installations,are in compliance with the technical requirement according to the Project specification. - Follow the open and closed of the Observation Report Register SR and NCR - Quality control of all E&I pre-commissioning works

- Controlling contractor procedures, inspection and test plans and other technical and quality documents, to ensure effective controls... -Coordination with client for technical query and other activities related to ongoing construction. - Incoming Inspection of the material dept to ensure that materials have all needed documentation before start of work - Performing inspection for all E&I equipment’s installations, hookup, loop checking and functional testing are in compliance with the technical requirement according to the project specification. - Inspection of cable installation including cable trays, cable glands, termination, insulation resistance, continuity testing etc. - Witnessing all tests including verification and calibration of instruments and safety devices - Inspection of Fiber optic cable installation - Inspection of High voltage system up to 10KV, Diesel generator, power transformer, Switchboard & HVAC Panel, Lighting and Earthing system - Performing inspection for all E&I equipment’s installations,are in compliance with the technical requirement according to the project specification. - Closing check list. - Generating, reviewing and approving Electrical & Instrument QVD Matrix.. - Quality control of all E&I pre-commissioning works - Red Line Mark Up on drawings for E&I and Telecom Disciplines.

Worked in Karabatan Power Plant Project comprises of 4 Gas Turbine Generators, 4 Heat Recovery Steam Generators and 2 Steam Turbine Generators. The plant will have agross capacity of 310MW. A fully Combined-Cycle Power Plant with an installed capacity of 310MW at 110kV and generating and distributing High Pressure steam for Special Economic Zone “National Industrial Petrochemical Technopark” Responsibilities: - Ensure Quality of the work & fulfilling project requirements. - Initiate corrective actions for any raised non-conformance, and implement a preventive action plan to prevent the re-occurrence of non-conformance. - Electrical and Instrumentation installation works - 110kV Substation - Power transformers (115/11kV Step-Up Transformers; 110/10.5kV Step-Down Transformers; 10/0.72kV LV TR ; 10/0.42kV LV TR) - Auxiliary distribution system (10KV MV SWITCHGEAR ;690V LV Switchgear; 400V LV switchgear; 400V MCC; 230V Distribution Board) - 110V DC DC & 230V AC UPS system; BATTERY - Protection relay system - Power and electrical control cables - Cable raceways (Cable Trench; Electrical Duct Banks; Cable trays; Hot dip galvanized steel conduits; PVC conduits; Flexible conduits) - Lighting and Small power system - Grounding and Lightning protection system - Telecommunication System - Motors - Installation Procedure & Manual of Crane & Hoist. - Coordinating all manpower and materials - Monitoring the construction plan; including schedule; quality report.

- Controlling contractor procedures, inspection and test plans and other technical and quality documents, to ensure effective controls... -Coordination with client for technical query and other activities related to ongoing construction. - Incoming Inspection of the material dept to ensure that materials have all needed documentation before start of work - Performing inspection for all E&I equipment’s installations, hookup, loop checking and functional testing are in compliance with the technical requirement according to the project specification. - Inspection of cable installation including cable trays, cable glands, termination, insulation resistance, continuity testing etc. - Witnessing all tests including verification and calibration of instruments and safety devices - Inspection of Fiber optic cable installation - Inspection of High voltage system up to 10KV, Diesel generator, power transformer, Switchboard & HVAC Panel, Lighting and Earthing system - Performing inspection for all E&I equipment’s installations,are in compliance with the technical requirement according to the project specification. - Closing check list and Acts. - Generating, reviewing and approving Electrical & Instrument QVD Matrix.. - Quality control of all E&I pre-commissioning works - Red Line Mark Up on drawings for E&I and Telecom Disciplines

- Inspection of the E&I and HVAC & Telecom activities - Follow up “ Inspection and Test Plan “ (ITP) - Insure that there is a strong health and safety culture when executing works - Inspection of the work force for to have the correct competency and certificates - Incoming Inspection of the material dept to ensure that materials have all needed documentation before start of work - Performing inspection for all E&I equipment’s installations, hookup, loop checking and functional testing are in compliance with the technical requirement according to the project specification. - Inspection of cable installation including cable trays, cable glands, termination, insulation resistance, continuity testing etc. - Witnessing all tests including verification and calibration of instruments and safety devices - Inspection of Fiber optic cable installation - Also performed Instrument Calibrations, Pressure Leak Testing, Loop Checking - Inspection and Installation for pressure testing of impulse lines and manifolds. - Inspection at substations in the high and low voltage side, power transformer, Switchgears & UPS Panel, Small power circuit, Lightning protection and Earthing system - Red Line Mark Up on drawings for E&I and Telecom Disciplines. - Controlling contractor procedures, inspection and test plans and other technical and quality documents, to ensure effective controls... - Closing check list and punch list. - Take actions whenever there are persons violating rules and procedures. - Give input to develop the site: Equipment, personnel, organization. - Equipment’s installation and inspection in Hazardous area (EX INSPECTION)

- Inspection of the E&I and F&G system - Follow up “ Visual Inspection, Closed and Detailed Inspection - Daily personnel Safety notification, Planning, Daily monitoring, Meetings, work with Client’s and etc. - Equipment’s installation and inspection in Hazardous zone (0,1,2). - Controlling all scopes, planning, giving daily report to Manager. - Performing inspection for all E&I equipment’s installations, hookup, loop checking and functional testing are in compliance with the technical requirement according to the project specification. - Inspection of installed equipment for inconsistencies.. - Ensure that the installation site work according to the standards regulations and Project Specifications. - Compiling Ex Registers & client databases. - Repair, surveys and risk assessment. - Closing check list and punch list. - Take actions whenever there are persons violating rules and procedures. - Organization Method statement, risk assessment and Electrical isolation PTW (Permit).

- Commissioning of electrical equipment. - Conducting individual equipment tests, testing insulation resistance, measuring the resistance of the system and electrical equipment - Pre-commission and Commission work inspection. - Switching power supply. - Works at substations in the high and low voltage side in the Switchboard.

- Insure that there is a strong health and safety culture when executing works - Performing inspection for all E&I equipment installations, hookup, loop checking and functional testing are following the technical requirement according to the project specification. - Inspection of cable installation including cable trays, cable glands, termination, insulation resistance, continuity testing etc. - Red Line Mark Up on drawings for E&I and Telecom Disciplines. - Controlling all scopes job, planning, giving daily report to Engineering. - Ensure that the installation site work according to the standards regulations and Project Specifications. - Take actions whenever there are persons violating rules and procedures. - Organization Method statement, risk assessment and Electrical isolation PTW (Permit).

- Electrical and Instrument equipment installation. - Telecom equipment installation. - E&I and Telecom cable pulling, glanding, termination. - Cable ladder/tray installation.

- Repair of asynchronous and synchronous electric motors. - Serviced by repair of steam turbines and air compressors. - Replacement of bearing and greasing on the motor. - Winding of the stator windings of synchronous motors at 220V and 380V. - Serviced and operated at substations from the high and low voltage side at the switchgear from 0,4 kVA to 6 kVA. - Switching on the high both low party and operative chains. - Operation, repair and switching on the main and auxiliary equipment of the steam turbine power plant. Commissioning of the repair crews through the smartly-admission system. Start of the turbine, synchronization into the network and a set of the base load of the turbine. - Organization Method statement, risk assessment and Electrical isolation PTW (Permit).

- Electrical and Instrument equipment installation. - E&I cable pulling, glanding, termination. - Cable ladder/tray installation.

Electric Technical Power Industry, Electric Power Industry

Технический, Электроэнергетика

Electromechanical, Electrician

Электромеханика, Слесарь-электромонтажник